The DNR is testing the effectiveness of a proprietary geochemical exploration technique in an area of known copper-nickel mineralization in Aitkin County, Minnesota. In case studies outside of Minnesota, the soil gas hydrocarbon (SGH) procedure developed by Activation Laboratories, Ltd. (ActLabs) has delineated mineralized bedrock targets buried under thick layers of overburden by extracting and analyzing organic compounds trapped on surficial sediment. The goal of this DNR project is to test the method’s efficacy in an area of known bedrock mineralization that is overlain with layers of both saprolite and clay-rich glacial till. The project combines SGH surface soil sampling with detailed characterization of till and saprolite samples obtained from rotosonic drill cores.
A comparison of the targeting results of this blind SGH soil survey against the known footprint of subsurface bedrock mineralization may provide useful guidance on the effectiveness of this exploration technique in other areas of underexplored State-owned or State-managed mineral rights.
Project Manager: Don Elsenheimer
Data released on November 5, 2014
DNR Open-File Project 394: Test of the SGH Survey Method
Summary and Data: The Minnesota Department of Natural Resources (DNR) is today releasing laboratory analytical results and associated files for saprolite samples from four (4) rotosonic borings in Northeastern Aitkin County, Minnesota. These rotosonic drill borings were completed by a mineral exploration company working on active State nonferrous metallic mineral leases in the area.
These documents are available below. A previously released sample location map is available.
Certificate of Analysis/Laboratory Report A14-06814, Activation Laboratories, dated October 14, 2014
This laboratory report provides analytical and quality control results for the multi-element analysis of bulk and silt+clay fractions (-63micron) from the 4 saprolite samples. Analytical packages included whole rock analysis of major elements, and ICP/MS trace element analysis. This laboratory report was dated and submitted by ActLabs to the DNR on October 14, 2014.
Rare Earth Element Plot
This PDF figure, provided by ActLabs, plots rare earth element (REE) distributions for the bulk and silt+clay fractions of the four saprolite samples. These distributions are of scientific value only; there is no significant economic value associated with the plotted concentrations.
Laboratory Data Spreadsheet
This spreadsheet, provided by ActLabs, reports the laboratory data in tabular spreadsheet form. The data table identifies analytical methods and method detection limits for each analyzed element.
Data table with locations
This DNR generated MS-Excel spreadsheet adds sample locations as UTM coordinates to the multi-element geochemical analysis of the bulk and -63micron portions of the four saprolite samples. Information provided in the ActLabs data table on analyte detection limits, units of measure, and analytical methods was stripped from this data table in order to create a format suitable for import into ArcGIS. The “less than” non-detect values reported in the ActLabs data table are replaced by values that are one-half the method detection limit. “Greater than” values are replaced by values that are 1 unit greater than the maximum detection limit (i.e. “> 10000” replaced by 10001). The original ActLabs data table and QC results are archived in this file as separate sheets.
Combined Analytical Results, Rotosonic Samples in NE Aitkin County
This DNR generated MS-Excel spreadsheet combines the new analytical data with previously-released results from DNR sampling of material from rotosonic drill cores in Northeastern Aitkin County. This single attribute table has a format suitable for import into ArcGIS. It combines analyses on bulk samples, silt and clay fractions, and heavy mineral concentrates from samples of till and saprolite from fifteen (15) rotosonic drill cores. The results were obtained using different analytical methods that have different method detection limits. “Less than” non-detect values are replaced by values that are one-half the method detection limit, while “greater than” values are replaced by values that are 1 unit greater than the maximum detection limit (i.e. “> 10000” replaced by 10001). More information regarding the methodology, detection limits, and QA/QC results may be obtained by clicking on the links that are tied to PDF versions of the original laboratory reports.
Past data releases for this project
Click on bars to expand each past data release.
- Data released on September 17, 2014
-
Summary and Data: The DNR is today releasing drill core logs, cross-sectional depictions, and associated files for fifteen (15) Rotosonic borings in Northeastern Aitkin County, Minnesota. These documents are available below:
Rotosonic Drill Core Descriptions and Interpretation of Glacial Sediment and Saprolite, Northeastern Aitkin County, Minnesota
This document includes fifteen (15) drill core descriptions, based on the observations made by the Minnesota Department of Natural Resources (DNR) geologists during their review of rotosonic drill cores obtained by a mineral exploration company working on active State non-ferrous metallic mineral leases in Northeastern Aitkin County, Minnesota.In March 2013, the DNR collected twenty-two (22) samples of saprolite and till from eleven (11) existing rotosonic drill cores within the project area. These samples were submitted to Overburden Drilling Management Ltd (ODM) for heavy mineral concentrate and silt+clay fraction separations. These processed materials were then sent by ODM to ActLabs for third-party geochemical analysis. These analytical results were released to the public in June and July of 2013.
In August 2014, DNR geologists gained access to four additional Rotosonic drill cores. The unconsolidated sediments and saprolite layers within each drill core were visually logged, and the sediments were associated with distinct glacial advances (as characterized in Figure 5 of Jennings and Kostka, 2014. Samples of saprolite were collected from each of these drill cores. These samples will be shipped to ActLabs for geochemical analysis; the pending analytical laboratory results will be provided in a future data release.
These drill core descriptions and glacial lobe associations were made for the purpose of classifying the samples of saprolite and glacial sediments for the geochemical survey. This review was also made in order to construct cross-sections and identify specific intervals of clay-rich sediments that might have influenced the results obtained by collecting overlying surface sediment samples for the SGH survey. These cursory observations are not intended for other purposes.
Rotosonic drill core location map
This PDF map image depicts the relative locations of the 15 rotosonic drill cores reviewed by DNR geologists, and identifies the drill cores used to construct North-South and West-East cross sections.Cross-sectional depictions
This PDF document includes North-South and West-East cross-sectional depictions of the glacial sediments and saprolite layers identified by DNR geologists during their visual review of the 15 rotosonic drill cores. Specific intervals within each core are roughly associated with distinct glacial advances (as characterized by Jennings and Kostka, 2014). Note that these schematic depictions are not drawn to scale. A copy of the rotosonic drill core location map is attached for viewer convenience.Rotosonic drill core sample information
This spreadsheet provides rotosonic drill core collar information for the 15 drill cores reviewed by DNR geologists in 2013 and 2014.ArcGIS Shapefile (all_sonic_locations.zip)
This ArcGIS shapefile (allsonic_locations.shp) encapsulates the geospatial information included within the drill core sample information spreadsheet. - Data released on January 31, 2014
-
In October 2013, the DNR collected surface materials from 152 sample locations and sent them to ActLabs for SGH analysis and interpretation. The samples were located within a grid that was proximal to a previously sampled grid (see July 3, 2013 data release). ActLabs performed the analysis, and provided the DNR the results in an interpretive report dated January 27, 2014. The DNR is publically releasing the following associated documents:
- January 27, 2014 laboratory report from Activation Laboratories, Ltd: 3D - SGH: A spatiotemporal Geochemical Hydrocarbon Interpretation, Minnesota Department of Natural Resources DNR SGH Soil Survey - Phase 2. This ActLabs laboratory report presents and interprets a large data set of SGH concentrations obtained from 152 samples, 8 duplicates, and 5 vertical test samples collected in the project area in October 2013 by DNR staff. This report includes supplemental documentation of the SGH methodology and separate data interpretations by ActLabs for the locations of redox zones, copper pathfinder class compounds and nickel pathfinder class compounds within the project area. Pathfinder class maps and SGH forensic signature ratings are used to identify areas with high Cu and Ni mineralization potential within the project area. This was a blind test of the technique; ActLabs identified areas with high or low mineral potential (based on SGH sampling) without knowing where areas of high-grade Cu-Ni mineralization existed (as defined by an extensive bedrock drilling program).
- Sample Location Map, DNR SGH Soil Survey. This 1:12,000 scale map plots SGH sample locations against a 2010 air photograph of the project area, and exploratory borehole locations.
- Sample location and field data, DNR SGH Soil Survey. This MS-Excel file provides field data for the SGH samples. UTM coordinates are provided for each sample location, as are information regarding the sample depth intervals and the type of material collected.
- Data released on July 2, 2013
-
The DNR is releasing the following field and analytical data associated with the test of the Soil Gas Hydrocarbon (SGH) Soil Survey Method. A discussion and analysis of these results will be included within a future open-file report.
1. SGH Soil Survey
In May 2013, the DNR collected surface samples from 179 points in a grid that covered the project area with 65 meter spacing. These surface materials were submitted to ActLabs for SGH analysis. The results of this analysis were provided to the DNR by ActLabs on June 27, 2013.
- June 27, 2013 laboratory report from Activation Laboratories, Ltd;: SGH - Soil Gas Hydrocarbon Predictive Geochemistry Report for Minnesota Department of Natural Resources DNR SGH Soil Survey. This laboratory report from Activation Laboratories, Ltd (ActLabs) presents and interprets a large data set of SGH concentrations obtained from 179 samples and 9 duplicates collected in the project area in May 2013 by DNR staff. This report includes supplemental documentation of the SGH methodology and separate data interpretations by ActLabs for the locations of redox zones, copper pathfinder class compounds and nickel pathfinder class compounds within the project area. Pathfinder class maps and SGH forensic signature ratings are used to identify areas with high Cu and Ni mineralization potential within the project area. This was a blind test of the technique; ActLabs identified areas with high potential (based on SGH sampling) without knowing where areas of high-grade Cu-Ni mineralization existed (as defined by an extensive bedrock drilling program).
- Sample Location Map , DNR SGH Soil Survey. This 1:5,000 scale map plots SGH sample locations against a 2010 air photograph of the project area, as well as active State mineral exploration leases and areas of delineated wetlands.
- Sample location and field data, DNR SGH Soil Survey. This MS-Excel file provides field data for the SGH samples. UTM coordinates are provided for each sample location, as are information regarding the sample depth intervals and the type of material collected.
2. Geochemical analysis of silt+clay fraction from rotosonic drill core samples of glacial till and saprolite.
ActLabs has completed geochemical analysis of the silt+clay fraction separations from twenty-two (22) samples of saprolite and till from eleven (11) existing rotosonic drill cores (see June 18, 2013 data release for sample collection and processing data). While these samples of till and saprolite from the base of the overburden layer are not part of the SGH soil survey, the results obtained from these samples using conventional methods of analysis provide valuable background information.
- June 27, 2013 ActLabs Laboratory Report Certificate of Analysis/Report. This laboratory report provide analytical and quality control results for the multi-element analysis of the silt and clay fractions from the 22 till and saprolite samples. Analytical packages included fire assay-ICP/MS finish (Au, Pt, Pd), whole rock analysis of major elements, and ICP/MS trace element analysis. Both the laboratory report and spreadsheet file were dated and submitted by ActLabs to the DNR on June 27, 2013.
- ActLabs June 27, 2013 data table for analysis of 22 silt+clay fraction samples. This MS-Excel spreadsheet, created by ActLabs and converted to PDF, provides the analytical and quality control results from the multi-element analysis of 22 silt+clay fraction samples in a data table format. Non-detect values and values that exceed maximum detection limits are reported as text strings (e.g. “< 5”, “> 1000”).
- June 27, 2013 ActLabs Data Plots. This PDF document displays rare-earth element (REE) distribution plots for the 22 silt+clay fractions of samples of till and saprolite.
- Data table for silt+clay fraction samples with locations. This MS-Excel spreadsheet adds sample locations as UTM coordinates to the multi-element geochemical analysis of the 22 silt+clay fraction samples. Information provided in the ActLabs data table on analyte detection limits, units of measure, and analytical methods was stripped from this data table in order to create a format suitable for import into ArcGIS. The “less than” non-detect values reported in the ActLabs data table are replaced by values that are one-half the method detection limit. “Greater than” values are replaced by values that are 1 unit greater than the maximum detection limit (i.e. “> 10000” replaced by 10001). The original ActLabs data table and QC results are archived in this file as separate sheets.
3. Geochemical analysis of heavy mineral concentrate, rotosonic drill core samples of glacial till and saprolite.
ActLabs has completed geochemical analysis of the magnetic and non-magnetic fractions of the heavy mineral concentrate (HMC) from twenty-two (22) samples of saprolite and till from eleven (11) existing rotosonic drill cores (see June 18, 2013 data release for sample collection and processing data). While these samples of till and saprolite from the base of the overburden layer are not part of the SGH soil survey, the results obtained from these samples using conventional methods of analysis provide valuable background information.
- June 27, 2013 ActLabs Laboratory Report Certificate of Analysis/Report. This laboratory report and associated spreadsheet file provide analytical and quality control results for the multi-element neutron activation analysis of 44 samples of magnetic and non-magnetic fraction HMC from till and saprolite from rotosonic drill cores. This laboratory report was submitted by ActLabs to the DNR on June 27, 2013.
- ActLabs June 27, 2013 data table for NAA analysis of 44 HMC samples. This MS-Excel spreadsheet, created by ActLabs and converted to PDF, provides the analytical and quality control results from NAA analysis of the 44 HMC samples in a data table format. Non-detect values are reported as text strings (e.g. “< 5”).
- Data table for HMC samples with locations. This MS-Excel spreadsheet adds sample locations as UTM coordinates to the multi-element NAA analysis of the HMC from the rotosonic till and saprolite samples. Information provided in the ActLabs data table on analyte detection limits, units of measure, and analytical methods was stripped from this data table in order to create a format suitable for import into Arc-GIS. The “less than” non-detect values reported in the ActLabs data table are replaced by values that are one-half the method detection limit. “Greater than” values are replaced by values that are 1 unit greater than the maximum detection limit (i.e. “> 10000” is replaced by 10001). The original ActLabs data table and QC results are archived in this file as separate sheets.
Map of Rotosonic Drill Hole Locations
Click for full size PDF - Data released on June 11, 2013
-
June 11, 2013 laboratory reports from Overburden Drilling Management, Ltd:
These laboratory reports from Overburden Drilling Management, Ltd. (ODM) provide processing data associated with the collection of silt+clay fractions and Heavy Mineral Concentrates (HMC) from twelve (12) samples of saprolite and ten (10) samples of overlying till within eleven (11) existing rotosonic drill cores. Samples were collected by the DNR in March, 2013. From each submitted sample, ODM isolated a <63 micron sieve fraction (silt+clay), and obtained HMC (S.G.>3.3) from a pan concentrate. The HMC was subjected to a magnetic separation, and ODM made general identifications of the metallic minerals present within the pan concentrate. Gold grain counts were also obtained (note that gold was not a targeted mineral in this project). The DNR has a contract with ODM to process these types of samples that it collects.
The silt+clay fractions and magnetic/non-magnetic HMC splits from each sample were sent by ODM to Activation Laboratories, Ltd. (ActLabs) for geochemical analysis. These analytical results are pending.
Excel table for 22 till and saprolite samples with locations and normalized gold grain counts
This excel table provides locations as UTM coordinates and normalized gold grain counts (10kg sample weight) for the 22 samples of till and saprolite identified in the ODM report. This data is combined with the ODM processing report data in a single spreadsheet file that is formatted for import into ArcGIS.
Map of rotosonic drill hole locations
This map displays the location of the eleven rotosonic drill locations that produced the core from which the 22 samples of till and saprolite were obtained. These drill holes locations are all on actively-leased State-managed mineral rights in Section 3 of T48N R22W, Aitkin County.
For more information:
Project Leader - Don Elsenheimer, Ph.D
500 Lafayette Road
St. Paul, Minnesota 55155-4045
tel. 651-259-5433
fax 651-296-5939
[email protected]
Disclaimer and Copyright Protection: Maps, Reports, Data, and Other Information - The State of Minnesota makes no representations or warranties express or implied, with respect to the use of the information contained herein regardless of its format or the means of its transmission. There is no guarantee or representation to the user as to the accuracy, currency, suitability, completeness, usefulness, or reliability of this information for any purpose. The user accepts the information “as is." The State of Minnesota assumes no responsibility for loss or damage incurred as a result of any user’s reliance on this information. All maps, reports, data, and other information contained herein are protected by copyright. Permission is granted to copy and use the materials herein for any lawful noncommercial purpose. Any user of this information agrees not to transmit or provide access to all or any part of this information to another party unless the user shall include with the information a copy of this disclaimer.